Instrumentação 05 Nov 2026

MFC | MEMS — Gas Mass Flow Controller: MEMS Technology and Digital Integration

Compact closed-loop measurement and control platform combining a MEMS sensor, digital electronics, and an electromagnetic proportional valve in a single instrument with ±1.0% SP accuracy and 100:1 turndown ratio.

The Prime Products MFC | MEMS instrumentation line delivers a compact closed-loop measurement and control platform for industrial, specialty, and analytical gases. The controller combines a MEMS mass flow sensor, digital control electronics, and an electromagnetic proportional valve into a single high-precision instrument.

100:1
Control Range (Turndown)
< 1.5 s
Control Response (T90)
< 50 ms
Measurement Response

01 / Operating Principle: Closed-Loop Measurement and Control

The micro-structured thermal sensor (MEMS) continuously monitors gas mass flow across a laminar bypass element. The digital controller compares the real-time measurement against the target setpoint and instantaneously modulates the proportional solenoid valve to regulate flow with superior stability and repeatability.

Step 01

MEASURE

Fast-response MEMS sensor (<50 ms) and laminar bypass for stable flow conditioning.

Step 02

PROCESS

Digital signal processing and linearization algorithms in closed-loop control.

Step 03

CONTROL

Integrated electromagnetic proportional valve (NC) with T90 response < 1.5 s.

Operational Advantages

  • Zero-point stability and repeatability: reliable performance across low and high flow rates enabled by a 100:1 turndown ratio.
  • Integrated measurement and regulation: eliminates the need for separate flow meters and control valves on the gas line.
  • Local and remote interface: instant local readout of flow rate and cumulative totalization on the LCD screen, plus RS485 / Modbus RTU digital communication and analog output.

02 / Controller Technical Specifications

Parameter Specification
Power supply24 VDC / 2.5 W
Control accuracy±1.0% of SP (Setpoint)
Measurement accuracy (up to 50 L/min)1% FS
Measurement accuracy (> 50 L/min)1.5% FS
Control range (Turndown)100:1
Control response time< 1.5 s (T90)
Measurement response time< 50 ms
Operating ambient temperature-10 to +55 °C
Digital communicationRS485 / Modbus RTU
Analog interface4–20 mA or 1–5 V*
Process connectionsG1/4 or PT1/2 female
Valve / Ingress protectionNormally Closed (NC) / IP40
Technical Note: Documentation covers 50, 100, and 300 SLPM configurations. Flow ranges, operating pressures, and electrical interfaces must be validated for each specific gas and application.

03 / Applications and System Integration

  • Pharma & Biotechnology: R&D, bioreactors, and controlled process atmospheres.
  • Semiconductors: Electronic process instrumentation and controlled vapor deposition.
  • Laboratories & R&D: Test benches, dynamic gas blending, and analytical systems.
  • Industrial Gases / OEM: Controlled gas feed in specialty machinery, skids, and continuous furnaces.

Prime Products Engineering + Instrumentation Scope

Beyond supplying the instrument, Prime Products supports Technical Selection (parameters, material compatibility, and flow sizing), Integration (direct MFC / RS485 communication with PLC / HMI and monitoring), and Implementation (gas network installation support and commissioning).

Information for quotation: Specify gas type, minimum/nominal/maximum flow rates, inlet and outlet pressures, required purity, control signals (Modbus / 4–20 mA / 1–5 V), and process connection.

Technical Gallery

MFC | MEMS — Gas Mass Flow Controller: MEMS Technology and Digital Integration - Imagem Principal
MFC | MEMS — Gas Mass Flow Controller: MEMS Technology and Digital Integration - Imagem Técnica 1
MFC | MEMS — Gas Mass Flow Controller: MEMS Technology and Digital Integration - Imagem Técnica 2
WhatsApp